|
|
|
 |
|
|
|
|
Digitrax Zephyr Xtra Basic Set
DCS51 Command Station/Booster/Throttle Easy to Use All-In-One Unit, LT1 LocoNet Cable/Decoder Tester, Complete Manuals
New features are 29 functions , 20 throttles and Recall , 3 amps and Blast programming for sound.
Part # ZEPHYRXTRA
$175.99
Click the photo to order
|
|
|
|
|
|
|
Digitrax Super Empire Builder Xtra Set
|
|
|
|
|
|
|
Digitrax Super Empire Builder Xtra Set
Radio Equipped
|
|
|
|
|
|
|
Digitrax Super Chief Xtra Set
|
|
|
|
|
|
|
Digitrax Super Chief Xtra Set
Radio Equipped
|
|
|
|
|
|
|
Digitrax DT402 Super Throttle
* Works with ANY LocoNet compatible system
* Full numeric keypad makes loco selection simple
* Run locomotives with “encoder click” knobs for speed and direction control
* Control light and sound effects functions with the press of a button
* Large LCD display shows locomotive status at a glance
* Built in flashlight for convenience
Part # DT402
$147.99
Click the photo to order
|
|
|
|
|
|
|
Digitrax DT402D Radio Equipped Super Throttle
The DT402D Duplex Super Throttle!
- * Works with ANY LocoNet compatible system
- * Full numeric keypad makes loco selection simple
- * Run locomotives with “encoder click” knobs for speed and direction control
- * Control light and sound effects functions with the press of a button
- * Large LCD display shows locomotive status at a glance
- * Built in flashlight for convenience
- Full Featured With Support For:
- * Duplex Radio operation with UR92
- * 29 Functions (F0-F28)
- * Convenient step-by-step throttle option set up
- * Simplified 4 or 2 digit addressing
- *Over 9,000 locomotive decoder addresses
- * 999 turnout decoder addresses
- * 29 Functions (F0-F28)
- * Playable whistle feature on F2
- * Decoder programming
- * Transponding “Find” feature
- * Fast clock display
- * Recall feature
Part # DT402D
$198.99
Click the photo to order
|
|
|
|
|
|
|
Digitrax DT402R Radio Super Throttle
The DT402R Super Throttle!
- * Works with ANY LocoNet compatible system
- * Full numeric keypad makes loco selection simple
- * Run locomotives with “encoder click” knobs for speed and direction control
- * Control light and sound effects functions with the press of a button
- * Large LCD display shows locomotive status at a glance
- * Built in flashlight for convenience
- Full Featured With Support For:
- * Simplex Radio operation with UR91
- * 29 Functions (F0-F28)
- * Convenient step-by-step throttle option set up
- * Simplified 4 or 2 digit addressing
- *Over 9,000 locomotive decoder addresses
- * 999 turnout decoder addresses
- * 29 Functions (F0-F28)
- * Playable whistle feature on F2
- * Decoder programming
- * Transponding “Find” feature
- * Fast clock display
- * Recall feature
Part # DT402R
$187.99
Click the photo to order
|
|
|
|
|
|
|
UT4D Duplex Equipped Utility Throttle
Features:
- Duplex Equipped Radio operation with UR92 Duplex transceiver
- InfraRed operation with UR90, UR91 or UR92
- Works with any LocoNet compatible system
- Supports 2 or 4-Digit Addressing.
- Functions F0-F12 for lighting and sound decoder operation.
- Direction switch with center brake position.
- Large knob for precise throttle control.
- Automatic Selection and Speed matching features.
- UT4 does not handle programming, turnout control, or turnoff layout power.
Part # UT4D
$108.99
Click the photo to order
|
|
|
|
|
|
|
Digitrax UT4R Utility Throttle
Simplex Radio operation
4-Digit Addressing , Low cost , Standard InfraReady , UT4R radio version , Functions F0-F12 for sound decoder operation , Direction switch with center brake position , Improved battery life , Large knob for precise throttle control , Automatic Selection and Speed matching features
Part # UT4R
$97.99
Click the photo to order
|
|
|
|
|
|
|
Digitrax UT4 Utility Throttle
4-Digit Addressing , Low cost , Standard InfraReady , UT4 upgradable to UT4R radio version , Functions F0-F12 for sound decoder operation , Direction switch with center brake position , Improved battery life , Large knob for precise throttle control , Automatic Selection and Speed matching features
Part # UT4
$63.99
Click the photo to order
|
|
|
|
|
|
|
Digitrax UP5 Universal Panel
Give your layout a professionally finished look while simplifying the hook-up, maintenance & troubleshooting of your Loconet layout.
Part # UP5
$15.49
Click the photo to order
|
|
|
|
|
|
|
Digitrax UR90 Infrared Receiver
The UR90 also looks similar to a UP-3 and is mounted in the fascia of the layout. The UR90 is simply an addition to your existing LocoNet so no additional wiring is needed. The UR90 will support approximately 10 DT100IR's or DT300R's. Some layouts will need more than one UR90 because IR is line of sight and the receivers must be able to "see" the IR signal.
Part # UR90
$34.49
Click the photo to order
|
|
|
|
|
|
|
Digitrax UR91 Radio/Infrared Receiver
Simplex Radio operation
The UR91 is the radio/IR receiver unit. The UR91 looks similar to a UP5 and is mounted in the fascia of the layout. The UR91 is simply an addition to your existing LocoNet so no additional wiring is needed. The antennas are concealed under the layout. The UR91 will support approximately 10 radio throttles.
Part # UR91
$112.99
Click the photo to order
|
|
|
|
|
|
|
Digitrax UR92 Radio/Infrared Receiver
Features:
* Simplex Infrared Receiver For Digitrax
Infra-Ready Throttles
* Duplex Radio (UR92), Simplex Radio (UR91)
and/or InfraRed (UR90) Wireless Can Be Used
Simultaneously On Any LocoNet Layout
* Range Is Approximately A 300 ft Diameter Circle
* Supports Up To 20 Digitrax Duplex Throttles
At The Same Time
* Group Name Feature Allows Multiple Clubs To
Run Independently In Close Proximity At Train
Shows and Exhibitions
* Includes PS14 Power Supply
* Operates In The 2.4 GHz Band
* Only One UR92 Is Needed To Run Duplex On
Most Layouts
Part # UR92
$127.99
Click the photo to order
|
|
|
|
|
|
|
Digitrax PR3 USB Programmer/Interface
Digitrax PR3 Link
PR3 Features
- Multifunction USB 2.0 PC connectivity for your railroad (Yay!)
- Digitrax “SoundLoader” compatible. Programs Digitrax sound projects to SFX decoders
- Programs CV’s for most DCC decoders
- LocoNet MS100 mode with Fully Buffered Input and Output data
- Runs on Windows XP, Vista and 2000.
- Runs on Mac OS 10.4/10.5 with JMRI.
- No external power needed for MS100 mode.
- Automatic configuration. No jumpers or switches required. Configurations can be set by software or manually.
- Selectable LocoNet termination. For standalone operation without needing a Command Station.
- LED state indicator lights.
- Small, convenient package
- Firmware updates available from Digitrax Web site.
- Meets FCC Class B requirements.
Part # PR3
$66.99
Click the photo to order
|
|
|
|
|
|
|
BD4 Quad Occupancy Detector
- Cost Effective occupancy detection for 4 detection sections
- Outputs for panel mounted LEDs to display occupancy
- Detects any powered locomotive
- Detects un-powered rolling stock equipped with resistor wheel sets
- Transmits occupancy information to your LocoNet System using DS54 or SE8C (sold separately).
BD4 Instructions
Part # BD4
$22.49
Click the photo to order
|
|
|
|
|
|
|
BDL168 Occupancy Detector
BDL168 LocoNet Occupancy Detector for 16 detection sections
The BDL168 provides cost effective occupancy detection for 16 detection sections. For use with one or two RX4 transponder detectors to set up 8 transponding zones and/or operations mode read back. Replaces BDL162. BDL168 Instructions
Part # BDL168
$114.49
Click the photo to order
|
|
|
|
|
|
|
RX4 4-Zone Transponding Receiver Add-on for BDL Series Detectors
4 ZoneTransponding Receiver Add-on for BDL16 series occupancy detectors.
Use up to two RX4s with a BDL168 to add transponding to any 8 detection sections on your layout.
Use one RX4 with a BDL162 or BDL16 to add transponding to any 4 detection sections on your layout.
(Note: BDL16 & BDL162 are discontinued).
Part # RX4
$41.49
Click the photo to order
|
|
|
|
|
|
|
RD2 Remote Diode for BDL168
Remote sensing of 2 detection sections. Eliminates the need for long runs of heavy gauge wire between the BDL16 & remotely located track sections.
RD2 Instructions
Part # RD2
$7.99
Click the photo to order
|
|
|
|
|
|
|
AR1 Auto Reversing Controller
The easiest way to add automatic reversing to a section of your layout.
8 amp Auto-reversing control for a single reversing district.
Simple to wire.
Tunable trip current lets you use it on any layout from Z to G.
AR1 operates with or without LocoNet so, it can be used on non-Digitrax DCC systems, too.
Part # AR1
$23.99
Click the photo to order
|
|
|
|
|
|
|
MS100 Computer Interface
The MS100 Computer Interface is designed to let a computer with an IBM compatible COM, or RS232 communications port, monitor Digitrax LocoNet. Application software running in the computer can then interpret the activity on the LocoNet and report back to the user via the computer screen. The MS100 is a signal level translator between LocoNet and a 25 pin DB25 style RS232 port.
Part # MS100
$33.99
Click the photo to order
|
|
|
|
|
|
|
PS14 Power Supply
The PS14 is a 300ma, 14 Volt power supply for powering Digitrax accessories like the UP5, BDL168, DS64, SE8C, LNRP, UR90 & UR91 and others
Part # PS14
$10.29
Click the photo to order
|
|
|
|
|
|
|
PS514 Power Supply
High efficiency power supply
7 selectable output voltages
For use with Digitrax Starter Sets and accessories in multiple track scales and utility supply usages.
12V, 13.8V, 15V, 16.8V, 19V, 20V, 24V DC output
Slide switch selectable
Supplied with US to IEC, 2-pin grounded cord set
Meets MEPS III "green" efficiency standards
CE for EM compatibility and IEC 60950 safety requirements
Full galvanic isolation of output voltage from AC input
RoHS environmentally sensitive manufacturing
Compact and lightweight
Power indicator light
Over current and overload protected
Replaces the PS515
Part # PS514
$45.99
Click the photo to order
|
|
|
|
|
|
|
PS2012 20 Amp Power Supply
This big regulated power supply delivers more power with less heat for more efficient booster operation. Operate up to 4 Five amp boosters with the PS2012 supply. Scale selectable for use with N, HO or large scale. DC Ammeter. On/Off Switch. Integral cooling fan. Design coordinated for use with Digitrax products.
Part # PS2012
$142.99
Click the photo to order
|
|
|
|
|
|
|
PM42 Quad Power Manager
PM42 Quad Power Manager lets you use a single booster and divide its output into 4 power sub-districts for automatic reversing &/or to improve operation by preempting booster shutdown when a short circuit is detected by the PM42. If you want to improve operation but don't need the added power (or expense) of adding a booster, the PM42 is the right answer for you. Each PM42 can run 4 sub-districts off a single booster in any combination of regular sub-districts and auto reversing sub-districts. PM42 Manual
Part # PM42
$59.99
Click the photo to order
|
|
|
