|
|
|
 |
|
|
Welcome to N Scale
|
|
|
|
Lenz DCC Decoders and Harness
|
|
|
|
|
|
LENZ Gold Mini-W Wired 10410 N and Z Scale Micro-Decoder
· Built to conform to all NMRA Standards and RPs (submitted to NMRA Testing)
· Super smooth and silent high frequency back-emf motor control.
· Supports NMRA DCC Bidirectional data communication.
· USP with optional power module for operation on dirty track.
· Asymmetrical DCC support including directional stopping.
· SUSI Sound Interface
· Adjustable precision stopping control.
· Low speed gear for switching operations.
· Selectable for operation with 14/27, or 28/128 speed steps.
· Operation on conventional DC layouts is possible or can be disabled.
· Provides .5 A continuous motor current, .8 amp peak , w/2A stall.
· Two function outputs rated at 100mA each with advanced function mapping
· Directional or independent lighting with dimming and extensive special effects.
· Support for Advanced Consist Control and Extended Addressing.
· Support for programming on the mainline (operations mode programming).
· Support for all form of programming as described in NMRA RP-9.2.3.
· Size: L 0.43" x W 0.35"x H 0.11"
Part # GoldminiW
$41.99
Click the photo to order
|
|
|
|
|
|
|
LENZ Gold Mini-D NMRA Small Plug 10411 N and Z Scale Micro-Decoder
· Built to conform to all NMRA Standards and RPs (submitted to NMRA Testing)
· Super smooth and silent high frequency back-emf motor control.
· Supports NMRA DCC Bidirectional data communication.
· USP with optional power module for operation on dirty track.
· Asymmetrical DCC support including directional stopping.
· SUSI Sound Interface
· Adjustable precision stopping control.
· Low speed gear for switching operations.
· Selectable for operation with 14/27, or 28/128 speed steps.
· Operation on conventional DC layouts is possible or can be disabled.
· Provides .5 A continuous motor current, .8 amp peak , w/2A stall.
· Two function outputs rated at 100mA each with advanced function mapping
· Directional or independent lighting with dimming and extensive special effects.
· Support for Advanced Consist Control and Extended Addressing.
· Support for programming on the mainline (operations mode programming).
· Support for all form of programming as described in NMRA RP-9.2.3.
· Size: L 0.43" x W 0.35"x H 0.13"
Part # GoldminiP
$41.50
Click the photo to order
|
|
|
|
|
|
|
LENZ Silver Mini-W Wired N and Z Scale Micro-Decoder
Super smooth and silent high frequency back-emf motor control.
Asymmetrical DCC support including directional stopping
Adjustable precision stopping control
Low speed gear for switching operations
Selectable for operation with 14/27, or 28/128 speed steps.
Operation on conventional DC layouts is possible or can be disabled.
Motor output = 0.5A continuous, 0.8A max, > 2 A stall.
Motor and function outputs protected
Four function outputs rated at 100mA each with advanced function mapping
Directional or independent lighting with dimming and special effects.
Support for Advanced Consist Control and Extended Addressing
Support for programming on the mainline (operations mode programming)
Support for all form of programming as described in NMRA RP-9.2.3
Supports service mode decoder lock
Silver MINI W has two functions outputs and the size is L 0.43" x W 0.35"x H 0.11”
Part # SilverminiW
$28.99
Click the photo to order
|
|
|
|
|
|
|
LENZ LE0521W N and Z Scale Micro-Decoder
The industry's smallest NMRA DCC decoder with fifth generation Back EMF motor control. The LE0521represents the next generation in the evolution of DCC. The Back EMF motor control on these decoders provides the smoothest operation of any decoder ever built. Size: L 0.51" x W 0.36" x H 0.14" N and Z Scale
Part # LE0521W
$38.99
Click the photo to order
|
|
|
|
|
|
|
LENZ LE0521D N and Z Scale Micro-Decoder
The industry's smallest NMRA DCC decoder with fifth generation Back EMF motor control. The LE0521represents the next generation in the evolution of DCC. The Back EMF motor control on these decoders provides the smoothest operation of any decoder ever built. Size: L 0.51" x W 0.36" x H 0.14"The LE0521D decoder is the same as the LE0521W but comes equipped with an NMRA small plug.N and Z Scale
Part # LE0521D
$38.99
Click the photo to order
|
|
|
|
|
|
|
LENZ LE1000 HO Scale Value Line Decoder
This line of decoders will have a few less features, a warranty more in line with industry practices and an exceptional price! Our purpose of introducing this decoder is to make DCC more affordable for users who do not need all the special features available in higher end decoders.
Size: L 0.9" x W 0.63"x H 0.13" L 22.9mm x W 16mm x H 3.2 mm
Part # LE1000
$14.29
Click the photo to order
|
|
|
|
|
|
|
LENZ LE1000 5 Pack HO Scale Value Line Decoder
This line of decoders will have a few less features, a warranty more in line with industry practices and an exceptional price! Our purpose of introducing this decoder is to make DCC more affordable for users who do not need all the special features available in higher end decoders.
Size: L 0.9" x W 0.63"x H 0.13" L 22.9mm x W 16mm x H 3.2 mm
Part # LE1000-5
$59.99
Click the photo to order
|
|
|
|
|
|
|
LENZ LE1014W HO Scale Thin Decoder Wire Only
This one-sided, ultra-thin decoder is suitable for all DC motors in HO Scale with motor current draw of up to 1 Amps maximum continuous operating current. The LE1014W comes with wires, the LE1014MP comes equipped with an NMRA medium plug and the LE1014-JST comes with the JST 9- Pin header (harness optional).
Size: LE1014W, LE1014MP L 1.3" x W 0.63"x H 0.14" LE1014-JST L 1.4" x W 0.63"x H 0.19"
Part # LE1014W
$17.99
Click the photo to order
|
|
|
|
|
|
|
LENZ LE1014W 5 Pack HO Scale Thin Decoder Wire Only
This one-sided, ultra-thin decoder is suitable for all DC motors in HO Scale with motor current draw of up to 1 Amps maximum continuous operating current. The LE1014W comes with wires, the LE1014MP comes equipped with an NMRA medium plug and the LE1014-JST comes with the JST 9- Pin header (harness optional).
Size: LE1014W, LE1014MP L 1.3" x W 0.63"x H 0.14" LE1014-JST L 1.4" x W 0.63"x H 0.19"
Part # LE1014W
$75.99
Click the photo to order
|
|
|
|
|
|
|
LENZ LE1014MP HO Scale Thin Decoder With NMRA Plug
This one-sided, ultra-thin decoder is suitable for all DC motors in HO Scale with motor current draw of up to 1 Amps maximum continuous operating current. The LE1014W comes with wires, the LE1014MP comes equipped with an NMRA medium plug and the LE1014-JST comes with the JST 9- Pin header (harness optional).
Size: LE1014W, LE1014MP L 1.3" x W 0.63"x H 0.14" LE1014-JST L 1.4" x W 0.63"x H 0.19"
Part # LE1014MP
$17.99
Click the photo to order
|
|
|
|
|
|
|
LENZ LE1024W HO Scale Ultra-Thin BEMF Wire Only Decoder
Lenz GmbH is pleased to announce the world's finest performing Ultra-thin NMRA DCC decoder with 5th generation Load Compensation (or "BACK EMF") for exceptional performance and control. One-sided flat design gives DCC operators a wide range of installation opportunities! Just .14" high!!!
Size: L 1.24" x W 0.64"x H 0.14" L 31.5mm x W 16 mm x H 3.6mm
Part # LE1024W
$24.99
Click the photo to order
|
|
|
|
|
|
|
LENZ LE1024MP HO Scale Ultra-Thin BEMF With NMRA Plug Decoder
Lenz GmbH is pleased to announce the world's finest performing Ultra-thin NMRA DCC decoder with 5th generation Load Compensation (or "BACK EMF") for exceptional performance and control. One-sided flat design gives DCC operators a wide range of installation opportunities! Just .14" high!!!
Size: L 1.24" x W 0.64"x H 0.14" L 31.5mm x W 16 mm x H 3.6mm
Part # LE1024MP
$24.99
Click the photo to order
|
|
|
|
|
|
|
LENZ LE1025WH HO Scale 1 Amp Wire Only Decoder
Extremely silent and smooth 12 bit resolution BACK emf Motor Control for the smoothest operation ever provided. Improved packet reception for superior dirty track operation. Selectable for operation with 14/27, 28/55, 128 direct drive or 128 speed table mode. Four on/off function outputs 3 with a current rating of 100 mA and 1 with 500mA. (outputs A-D) 8 Special Lighting Effects
Size: L 0.88" x W 0.62"x H 0.25" L 22.5mm x W 16mm x H 6.3mm
Part # LE1025WH
$26.99
Click the photo to order
|
|
|
|
|
|
|
LENZ LE1025MP HO Scale 1 Amp NMRA Plug Decoder
Extremely silent and smooth 12 bit resolution BACK emf Motor Control for the smoothest operation ever provided. Improved packet reception for superior dirty track operation. Selectable for operation with 14/27, 28/55, 128 direct drive or 128 speed table mode. Four on/off function outputs 3 with a current rating of 100 mA and 1 with 500mA. (outputs A-D) 8 Special Lighting Effects
Size: L 0.88" x W 0.62"x H 0.25" L 22.5mm x W 16mm x H 6.3mm
Part # LE1025MP
$28.99
Click the photo to order
|
|
|
|
|
|
|
LENZ LE1035WH HO Scale 1 Amp Wire Only Decoder
Lenz GmbH is pleased to announce the world's finest performing Ultra-Drive NMRA DCC decoder with 5th generation Load Compensation (or "BACK EMF") for exceptional performance and control. With Precision Braking Control AND Low Gear Switching Drive.
The DIGITAL plus locomotive decoder LE1035 is suitable for all DC motors in HO scale locomotives with continuous current draw of 1.0 Amp. or less.
Size: L 0.85" x W 0.65"x H 0.26" L 21.5mm x W 16.5 mm x H 6.6mm
Part # LE1035WH
$29.99
Click the photo to order
|
|
|
|
|
|
|
LENZ LE1035MP HO Scale 1 Amp NMRA Plug Decoder
Lenz GmbH is pleased to announce the world's finest performing Ultra-Drive NMRA DCC decoder with 5th generation Load Compensation (or "BACK EMF") for exceptional performance and control. With Precision Braking Control AND Low Gear Switching Drive.
The DIGITAL plus locomotive decoder LE1035 is suitable for all DC motors in HO scale locomotives with continuous current draw of 1.0 Amp. or less.
Size: L 0.85" x W 0.65"x H 0.26" L 21.5mm x W 16.5 mm x H 6.6mm
Part # LE1035MP
$29.99
Click the photo to order
|
|
|
|
|
|
|
LENZ LY011 5 Pack Decoder JST Wire Harness
Designed for all decoders that support the 9 pin industry standard decoder socket.
Install one decoder harness in each locomotive.
Allows you to share a decoder between multiple locomotives.
Package includes harnesses for 5 locomotives.
Part # LY011-5
$10.99
Click the photo to order
|
|
|
|
|
|
|
LENZ LY012 5 Pack Decoder JST Wire Harness With NMRA Plug
Designed for all decoders that support the 9 pin industry standard decoder socket.
Each Harness contains an NMRA medium 8 pin plug .Install one decoder harness in each locomotive.
Allows you to share a decoder between multiple locomotives.
Package includes harnesses for 5 locomotives.
Part # LY012-5
$19.99
Click the photo to order
|
|
|
|
|
|
|
LENZ LY013 Decoder JST Long
( 200mm)Wire Harness With NMRA Plug
Designed for all decoders that support the 9 pin industry standard decoder socket.
Each Harness contains an NMRA medium 8 pin plug .Install one decoder harness in each locomotive.
Allows you to share a decoder between multiple locomotives.
Package includes harnesses for 5 locomotives.
200mm long wires
Part # LY013
$4.99
Click the photo to order
|
|
|
|
|
|
|
LENZ LS100 Accessory Decoder
The accessory decoders LS100/LS110 are the links between the DIGITAL plus system and accessory devices (e.g. turnouts, signals, uncoupling ramps, etc.) on your model railroad. The LS100 controls 4 accessories with feedback.
Part # LS100
$64.99
Click the photo to order
|
|
|
|
|
|
|
LENZ LS150 Accessory Decoder
Introducing the DIGITAL plus by Lenz LS150 turnout decoder, designed for cost effective turnout control for up to 6 independent turnouts without feedback.
Part # LS150
$38.99
Click the photo to order
|
|
|
