|
|
|
 |
|
|
Electrical , Signals and Lighting
|
|
|
|
|
|
TCS 20' 34 Gauge Red Magnet Wire
Thirty four gauge wire available in red and green only for now. Wire is thirty four gauge, one strand of soft copper wire with outside diameter of .006" (0.16 mm). Excellent for decoder installation work for Z, N and HO scale. This wire has a clear insulation which can be removed easily by dipping it in hot solder.
Part # TCS-1315
$2.69
Click the photo to order
|
|
|
|
|
|
|
TCS 20' 34 Gauge Green Magnet Wire
Thirty four gauge wire available in red and green only for now. Wire is thirty four gauge, one strand of soft copper wire with outside diameter of .006" (0.16 mm). Excellent for decoder installation work for Z, N and HO scale. This wire has a clear insulation which can be removed easily by dipping it in hot solder.
Part # TCS-1316
$2.69
Click the photo to order
|
|
|
|
|
|
|
Micro-Trains (Rapido) Easy-Peasy Passenger Car Lighting Kit
No more flickering lights over switches and other dead spots, no more drain on your power pack caused by a fleet of passenger cars all drawing power, no more lighting meltdowns due to high track voltage, turn car lighting on and off with ease without the cost of a decoder in every car.
Sound impossible? Nope, its Easy-Peasy... Rapido's battery powered Easy-Peasy lighting kits!.
Installation is just as easy too - no soldering, no complex wiring, and no problems on DC or DCC.
Part # MT99514001
$7.19
Click the photo to order
|
|
|
|
|
|
|
Fifer Hobby Supply Easy-Peasy Battery 10 Pack
These are our imported replacement batteries that fit the Easy-Peasy lighting kits!.
Installation is easy .
Part # FHS-Batteries
$2.99
Click the photo to order
|
|
|
|
|
|
|
Ngineering LED Power Distribution Board
The N8102 is designed to provide a convenient way to connect power to multiple LEDs from a single power source. It is ideal for lighting projects such as in model railroad structures, street lighting, dioramas, or anywhere that multiple LED light sources are needed. Side A (front) of the board provides power for up to 16 LEDs by using highly-regulated 20ma current sources. These sources will support 20ma LEDs of any color and colors can be mixed within a group. Solder pads are provided for optional brightness-adjustment resistors to allow individual control of intensity of every LED if desired. Side-B (rear) of the board provides connection for up to 12 additional LEDs. These connections have solder pads for LED current control resistor placement. This module will support a power supply input voltage of up to 18 volts-DC. Nylon spacers for mounting are included with each board.
Link to board information
Part # N-N8102
$9.59
Click the photo to order
|
|
|
|
|
|
|
Ngineering 9 Volt Battery Clip
These handy snap-on battery clips will connect to any PP3 type 9-volt battery (alkaline, NiCad, or Lithium). The snap connectors are nickel-plated steel for long life and the posts are tin-plated brass for easy soldering. The posts can be easily cut shorter for circuit board mounting applications.
Can be used on N8102 above.
(pack of 4)
Part # N-N3301-4
$3.96
Click the photo to order
|
|
|
|
|
|
|
Ngineering Ultra-Miniature SPDT Switch
If you need an incredibly small SPDT switch to turn something on and off, or switch between two devices, we've got just the one for you. Made by ITTCannon, this little slide switch features silver contacts and will carry 150ma at 12 volts! To see just how small this little fellow is, click on this Compare size link . Incredible! Mechanically rated at 10,000 cycles, it will certainly last. The sliding action has a positive "click".
(pack of 2)
Part # N-N3200-2
$2.28
Click the photo to order
|
|
|
|
|
|
|
Ngineering Ultra-Miniature SPDT Switch
If you need an incredibly small SPDT switch to turn something on and off, or switch between two devices, we've got just the one for you. Made by ITTCannon, this little slide switch features silver contacts and will carry 150ma at 12 volts! To see just how small this little fellow is, click on this Compare size link . Incredible! Mechanically rated at 10,000 cycles, it will certainly last. The sliding action has a positive "click".
(pack of 10)
Part # N-N3200-10
$10.59
Click the photo to order
|
|
|
|
|
|
|
Ngineering Street Light Kit
18-foot Curved-neck Streetlight .
This lighting kit includes all tubing, lampshades, wire, LEDs and information necessary to fabricate 8 (eight) streetlights just like the one shown in the picture above. This curved-neck streetlight is a replication of a very basic style that has been around for more than 75 years and is still manufactured today. It can be found in towns and cities, waterfront areas, industrial areas, trackside at train stations, parks, and residential areas.
Details and More Info
(pack of 8)
Part # N-NK016-1
$27.99
Click the photo to order
|
|
|
|
|
|
|
Ngineering Gooseneck Light Kit
This lighting kit includes all tubing, lampshades, wire, LEDs and information necessary to fabricate 8 (eight) gooseneck style building lights just like the one shown in the picture above. This style of building light is a replication of a type of exterior building light that has been around for as many years as the streetlight above and is still manufactured today. It has typically been used for entryway lighting and signage lighting, but could also be pole mounted for area lighting if desired .
Details and More Info
(pack of 8)
Part # N-NK017-1
$29.99
Click the photo to order
|
|
|
|
|
|
|
Fred (end of train flasher)
This easy to use complete kit contains all you need but a boxcar and drill!
Kit Includes:
Red Flashing 1.8mm LED set up for 3 volts
3 volt coin cell holder with switch
3 volt coin cell
EZ shrink tube, shrinks with lighter/hair dryer
Instant FRED. Fun and quick one time project, for many years of enjoyment. There is no circuit board, no need for any accessory power source.
The LED is Guaranteed to work for 2 full years with free replacement.
Part # ED-Red-Flasher
$4.79
Click the photo to order
|
|
|
|
|
|
|
Welder
Welding is a common sight in Railroad repair sheds, many types of industry, automotive garages, and military installations.
Go ahead and add a lively welding scene to your Diorama!
Welding effect kit is a combination of 3 LEDs:
2 Flashing White and 1 Solid Blue.
No circuit board needed!
Part # ED-Welder
$7.29
Click the photo to order
|
|
|
|
|
|
|
Fire
The Fire Kit is a combination of 3 LEDs: a Flashing Red, a Flashing Yellow and a Solid Orange. The secret to the fire effect is the very different flash rates of the 3 LEDs, giving a realistically random effect. You get a ready to use pack of 3 LEDs.
Part # ED-Fire
$7.19
Click the photo to order
|
|
|
|
|
|
|
Red Flashing Beacon
These Warning Beacon Flashing LEDs come fully pre-assembled and look really great on Water Towers, Smoke Stacks and Bridges, Electrical Transmission Towers, and on Radio Towers.
Part # ED-Flasher
$4.89
Click the photo to order
|
|
|
|
|
|
|
Multi Scale Police Siren
This Police Car Siren has 4 realistic sounds:
◦Wail
◦Priority
◦Phaser
◦4th Sound is a combination of these 3 sounds with an air horn.
Includes switch and speaker
Part # ED-Siren
$18.99
Click the photo to order
|
|
|
|
|
|
|
Arc Welder
This is by Berkshire Junction and simulates a Workshop arc welder with a bright white , random flashing LED
Part # arcwelder
$27.99
Click the photo to order
|
|
|
