N Scale Electrical Tower Style 2 Kit
Tower Version #2 can be found in almost every state carrying up to six wires on the mast arms and two wires on the mast head. The model represents a 102 foot tower with two different isolator formats. Engineered with tab & slot construction, this model can be built in just one evening. The tower can be either soldered, or assembled with a good CA glue.
Dimensions: 7.25” Tall X 1.875”
Part # TC-1000201
$37.99
Click the photo to order

N Scale Oil Drilling Derrick Kit
The derrick is 95 feet and is engineered to accommodate a Walthers walking beam pump. The derrick has two grated platforms with railings and joist detail. Two offset ladders are supplied to gain access to the top platform which has an A-Frame hoist and pulley
Engineered with tab & slot construction, this model can be built in just one evening The derrick can be either soldered, or assembled with a good CA glue.
Dimensions: 7.25” X 1.4”
Part # TC-1000301
$33.99
Click the photo to order

N Scale Modern Oil Storage Tank Kit
This kit is a quick one evening kit with exceptional details. The tank is a one piece resin cast with details that can be CA glued to the tank. Panel lines have been included in the casting to increase the realism. Instead of the large bulky railing and ladders of other manufacturers, we have included etched brass railings and a safety cage ladder with the kit
Dimensions: 3.625” Diameter X 3.25” Tall
Part # TC-1000401
$18.99
Click the photo to order

N Scale Yard Tower Kit
Although this Yard Tower is based on the prototype that was found in the Santa Fe Barstow Yard and the Southern Pacific San Jose Yard, similar ones are found all over the country such as in the Allentown Yard. The main structure is corrugated siding and the wrap-around walkway is see-through grating with actual supporting joists underneath. Kit includes all etched and cast brass as shown begging to have the interior added to be the showcase of your yard.
Dimensions: 1.5”  X 2.875” Tall
Part # TC-1000501
$33.99
Click the photo to order

N Scale Radio Tower Kit
This kit is a quick one evening kit. Unlike other towers, this tower has all sides fully connected making the tower more rigid and requiring less assembly time. The N-Scale tower is a one piece structure with two folds and one joint. The kit can be extended using multiple kits and include two type of microwave antennas and several whip antennas that can be installed at different heights.
Dimensions: 11.7” Tall
Part # TC-1000601
$15.99
Click the photo to order

N Scale 40ft Tankcar Loading Platform Kit
This kit is a quick one evening kit with exceptional details. The loading platform is modular where multiple platforms can be grouped end-to-end to create any length required. There is a small movable platform that is recessed and swings down to the tankcar. The deckway has the supporting structure for four delivery pipes where taps can be routed to the loading platform.
Dimensions: 3.19” X .37” 
Part # TC-1000701
$15.99
Click the photo to order

N Scale 50ft Tankcar Loading Platform Kit
This kit is a quick one evening kit with exceptional details for servicing 50ft Tankcars such as the Athearn 50ft and the Atlas 17600gal Tankcar. The loading platform is modular where multiple platforms can be grouped end-to-end to create any length required. There is a small movable platform that is recessed and swings down to the tankcar. The deckway has the supporting structure for four delivery pipes where taps can be routed to the loading platform.
Dimensions: 4.0” X .875” 
Part # TC-1000703
$19.99
Click the photo to order

N Scale Platform Shelter Kit
This add-on kit can be placed onto any of our Tankcar Loading Platforms to protect the loading of liquids from the weather.
 
Part # TC-1000709
$7.99
Click the photo to order

N Scale Platform Crossover Bridge Kit
The Platform Bridge will connect two rows of Tankcar Platforms. The kit comes with 2 small stands, 1 large stand, 2 stairs, bridge & railing.
 
Part # TC-1000801
$15.99
Click the photo to order

N Scale Platform Crossover Stairs Kit
The Platform Stairs will extend the Crossover Bridge that connects two rows of Tankcar Platforms. The kit comes with 1 small stands, 1 large stand, 1 stair, landing & railing.
 
Part # TC-1000901
$15.99
Click the photo to order

N Scale Engine Service Platform Kit
This module is the basic raised platform made of grated walkway with stairs at each end. The platform height has been designed to be with the sill top of most engines. There are provisions in the walkway for railings when used on outer tracks that are not double sided. When placed between two tracks, the railings can be omitted.
Dimensions   5.0”L X .395”W X  .510”H
Part # TC-1001101
$15.99
Click the photo to order

N Scale Crossbucks and Signs Kit
50 degree and 90 degree Crossbucks. Also includes mast signs
2 TRACKS
3 TRACKS
4 TRACKS
DANGER
LOOK OUT FOR LOCOMOTIVES
Part # TC-1001404
$10.19
Click the photo to order

N Scale Team Track Crane Kit
Based on an Calumet 10-Ton prototype serving a double track on the Erie, this is a structure to be noticed in the yard or engine service area.
This easy one evening kit features a rolling crab.
Included: N-Scale - Z-Scale wheels and rail.
Part # TC-1001601
$20.99
Click the photo to order

N Scale Baseball Field Kit
It's all here! Batters cage, dugouts, benches fencing and even the bases. Etched out of stainless steel, the Baseball Field kit can be assembled with CA Glue in under an hour.
Part # TC-1001701
$59.99
Click the photo to order

N Scale Woodchip Loader Kit
This will be our first all complete kit creating an entire scene. Included in the kit will be the Loader with laser-cut wood siding, second Access Platform, pre-bent Piping, Pipe Supports, Pump House and laser-cut wood Holding Pen.
Taken directly from a Woodchip Loader in service in Redding, CA This kit will offer stunning details.
Part # TC-1001901
$67.99
Click the photo to order

N Scale Overhead Crane Gantry Kit
Found in almost every type of heavy industry, this Gantry System has been designed for the Walthers N-Scale Heavy Duty Crane. Designed to be ganged together to extend the length of the Gantry Beam. Kit includes the stairs and platform for the operators cab of the Walthers N-Scale Heavy Duty Crane. Prototype for model was a scrap yard in Baltimore.
Part # TC-1002001
$42.99
Click the photo to order

Back to Structures

Back to Top