Woodland Scenics Water Effects Colors and Undercoats

Click Here To See The Albuquerque Carnuel & Tijeras Railroad

View Cart




		Welcome to N Scale

Woodland Scenics Water Effects , Colors and Undercoats

	WATER EFFECTS





	Woodland Scenics water products require no mixing, are water-soluble and flexible. Any water scene can be modeled using these products, including great waterfalls, raging rivers, still, quiet water and more. Create the illusion of water depth (before pouring water products) with Earth Colors Liquid Pigments. Add submerged items such as rocks, Dead Fall, junk, etc. before adding water, (using Water Effects as an adhesive). Dry 24 hours before pouring water. 1. Pour Realistic Water in prepared water cavity. 2. To make a waterfall, measure the fall area. Squeeze Water Effects onto non-stick surface. 3. Spread the Water Effects one-half inch longer than the waterfall length. 4. When dry, pull up Water Effects. Brush a little Water Effects on the back of the ends of the waterfall for adhesion and attach it to the area. Purchase the Scenery Manual for additional information on how to use the Landscaping System.

Realistic Water 16 oz.
Use to model still or slow-moving water, such as ponds, rivers, lakes and more. Pour directly from the bottle. Realistic Water is self-leveling. Pour no more than 1/8” deep. Dries clear in approximately 24 hours and the bottle covers an area 17” in diameter when poured to the recommended depth of 1/8”.
Part # WOO-C1211
$15.99
Click the photo to order

Water Effects 8 oz.
Use to model fast-moving waters, such as waterfalls, rapids or churning water. Mold the Water Effects in desired shape and let it dry at least 24 hours. It dries clear and is flexible and non-toxic. It can be used on top of dried Realistic Water to add water movement.
Part # WOO-C1212
$10.39
Click the photo to order


	EARTH COLORS


	Use Earth Colors to color rocks, terrain and plaster castings. These water-soluble pigments can be diluted and blended in limitless combinations. Color plaster castings using our "leopard spot" technique. Purchase the Scenery Manual for additional information on how to use the Terrain and Landscaping Systems.

Woodland Scenics Earth Color Kit
This is an amazingly simple system for coloring terrain and plaster castings such as rocks, retaining walls, culverts and tunnel portals. Beginners get craftsman-quality results. The Earth Color Kit includes instructions, applicator, palette and eight 1 oz. bottles of Earth Colors Liquid Pigment (White, Concrete, Stone Gray, Slate Gray, Black, Raw Umber, Yellow Ocher and Burnt Umber).
Part # WOO-1215
$15.49
Click the photo to order

Earth Colors White 4 oz.

Part # WOO-C1216
$4.25
Click the photo to order

Earth Colors Concrete 4 oz.

Part # WOO-C1217
$4.25
Click the photo to order

Earth Colors Stone Grey 4 oz.

Part # WOO-C1218
$4.25
Click the photo to order

Earth Colors Slate Grey 4 oz.

Part # WOO-C1219
$4.25
Click the photo to order

Earth Colors Black 4 oz.

Part # WOO-C1220
$4.25
Click the photo to order

Earth Colors Raw Umber 4 oz.

Part # WOO-C1221
$4.25
Click the photo to order

Earth Colors Burnt Umber 4 oz.

Part # WOO-C1222
$4.25
Click the photo to order

Earth Colors Yellow Ocher 4 oz.

Part # WOO-C1223
$4.25
Click the photo to order


	UNDERCOAT PIGMENTS


	Use Undercoat Pigments to provide a base coat of color over white Plaster Cloth. This is the perfect base color under low ground covers, such as Fine and Blended Turf. Use full-strength or diluted. Purchase the Scenery Manual for more information on using the Terrain System.

Green Undercoat 8 oz.Vol.
Use to create a lush green base for golf courses, lawns and anywhere you want a bold, green color.
Part # WOO-C1228
$5.59
Click the photo to order

Earth Undercoat 8 oz.Vol.
Use to create a lush green base for golf courses, lawns and anywhere you want a bold, green color.
Part # WOO-C1229
$5.59
Click the photo to order

Back to Scenery