Azatrax LARY DCS single coil Latching Relay
These can be used to place LED’s on a control panel or show the current state of a Kato turnout for signal systems.
Latching power relay with DPDT double-pole, double-throw contacts, plus quick-connect spring terminals
flyback voltage protection, and printed circuit board for convenient mounting.
Contacts rated for up to 2 amps, 30 volts, sufficient for any model railroad circuit.
May be used with an IR train detector to control high current accessories or to automatically switch track power to reversing loops.
Latching feature ensures that this relay will maintain its same position when system power is turned off.
https://www.azatrax.com/latching-relay.html
Part # AZA-LARYDCS
$11.99 each
Click to order
DPDT on-off-on Momentary Switch
These switches are very high quality for use as Kato turnout controls on conventional control panels. They can also be used on any other solenoid type turnout as well. Similar to shown but round handle.
See instructions here for Kato wiring ONLY.
Part # FHS-SwitchS
$6.39 each
Click to order
DPDT on-off-on Block Control Switch
These switches are very high quality for use as on-off-on for block control on conventional control panels as well as many other uses.
Not Momentary
Part # FHS-SwitchB
$4.59 each
Click to order
Kadee Quickie Panel Switches
Single Pole, Single Throw, push button Control Panel Switches with color-coded caps.
AC or DC at 3 amp. Use for un-couplers, turnout motors, etc.
2 Black – normally closed
2 Red – normally open
Part # KD-163
$4.29
Click to order
Kadee Quickie Panel Switches
Single Pole, Single Throw, push button Control Panel Switches with color-coded caps.
AC or DC at 3 amp. Use for un-couplers, turnout motors, etc.
4 Red – normally open
Part # KD-165
$5.49
Click to order
Atlas Layout Wire – Black 50′
This colored wire will make wiring your layout easier than ever! Twenty gauge stranded copper; 50′ reel.
Part # ATL-315
$12.79
Click to order
Atlas Layout Wire – Red 50′
This colored wire will make wiring your layout easier than ever! Twenty gauge stranded copper; 50′ reel.
Part # ATL-316
$12.79
Click to order
Atlas Layout Wire – Green 50′
This colored wire will make wiring your layout easier than ever! Twenty gauge stranded copper; 50′ reel.
Part # ATL-317
$12.79
Click to order
Atlas Layout Wire – Yellow 50′
This colored wire will make wiring your layout easier than ever! Twenty gauge stranded copper; 50′ reel.
Part # ATL-318
$12.79
Click to order
Atlas Layout Wire – Blue 50′
This colored wire will make wiring your layout easier than ever! Twenty gauge stranded copper; 50′ reel.
Part # ATL-319
$12.79
Click to order
Atlas 5 Conductor Ribbon Wire 50′
Each card contains 50′ of 5 conductor stranded ribbon wire that can be used with any scale Atlas switch machines. Also can be used as layout wire.
Part # ATL-312
$26.99
Click to order
Atlas Spade Connectors
A handy small electrical hookup connector designed for tight spaces. For #18-22 wire and #3 screw post. Maximum width is .218″ (24 pieces per pkg.)
Part # ATL-201
$6.29
Click to order
Phosphor Bronze Wire Assortment
3 feet each of size .010 .015 .020
Part # FHS-2007-01
$5.99
Click to order
