Accutrack II Speedometer
Programmable for N or HO, this unit stands over any track, and displays the speed of a train as it passes, in either direction.
It is a stand-alone device, and runs off two AAA batteries, included in the package, so is ideal for DC or DCC layouts.
The speedometer uses the precision of a micro-controller to measure the time between two infrared beams that the train passes through.
Based on this time, the scale speed can be calculated from a mathematically derived calibration factor.
Built into the software are the calibration factors for N & HO scales, and these factors are selectable from a button accessible from the front panel of the device.
Speed is displayed for 5 seconds and then unit goes into power saving mode.
Auto shut off after 5 minutes of no trains.
N scale (1:160)
N scale (1:148)
Configurable speed measurement for MPH or KPH
Speed increments of 0.1 MPH/KPH when less than 10 MPH/KPH
Speed increments of 1 MPH/KPH when 10 MPH/KPH or over
height clearance sufficient for HO AutoMax and double-stack high box container cars
configurable auto-off battery saver for 1 to 30 minutes since last speed measurement
2 AAA batteries
Part # Accutrack2
Click to order