TCS 20′ 34 Gauge Red Magnet Wire
Thirty four gauge wire available in red and green only for now. Wire is thirty four gauge, one strand of soft copper wire with outside diameter of .006″ (0.16 mm). Excellent for decoder installation work for Z, N and HO scale. This wire has a clear insulation which can be removed easily by dipping it in hot solder.
Part # TCS-1315
$3.99
Click to order
TCS 20′ 34 Gauge Green Magnet Wire
Thirty four gauge wire available in red and green only for now. Wire is thirty four gauge, one strand of soft copper wire with outside diameter of .006″ (0.16 mm). Excellent for decoder installation work for Z, N and HO scale. This wire has a clear insulation which can be removed easily by dipping it in hot solder.
Part # TCS-1316
$3.99
Click to order
TCS 10 GOLDEN WHITE LED with MAGNET WIRE
10 pack Golden White surface mount LED’s with 6″ magnet wire leads attached. Excellent for super tight applications.For more information and images of this LED lit up visit this link
Part # TCS-1322
$41.59
Click to order
10 pack Sunny White surface mount LED’s with 6″ magnet wire leads attached. Excellent for super tight applications.For more information and images of this LED lit up visit this link
Part # TCS-1323
$41.59
Click to order
10 pack Green surface mount LED’s with 6″ magnet wire leads attached. Excellent for super tight applications.For more information and images of this LED lit up visit this link
Part # TCS-1403
$41.59
Click to order
10 pack Yellow surface mount LED’s with 6″ magnet wire leads attached. Excellent for super tight applications.For more information and images of this LED lit up visit this link
Part # TCS-1404
$41.59
Click to order
TCS 10 RED LED with MAGNET WIRE
10 pack Red surface mount LED’s with 6″ magnet wire leads attached. Excellent for super tight applications.For more information and images of this LED lit up visit this link
Part # TCS-1405
$41.59
Click to order
No more flickering lights over switches and other dead spots, no more drain on your power pack caused by a fleet of passenger cars all drawing power, no more lighting meltdowns due to high track voltage, turn car lighting on and off with ease without the cost of a decoder in every car.
Sound impossible? Nope, its Easy-Peasy… Rapido’s battery powered Easy-Peasy lighting kits!. New Multi LED light!
Installation is just as easy too – no soldering, no complex wiring, and no problems on DC or DCC.
Part # RAP-102021
$13.59
Click to order
These are our imported replacement batteries that fit the Easy-Peasy lighting kits!.
Installation is easy .
Part # FHS-Batteries
$2.99
Click to order
This easy to use complete kit contains all you need but a boxcar and drill!
Kit Includes:
Red Flashing 1.8mm LED set up for 3 volts
3 volt coin cell holder with switch
3 volt coin cell
EZ shrink tube, shrinks with lighter/hair dryer
Instant FRED. Fun and quick one time project, for many years of enjoyment. There is no circuit board, no need for any accessory power source.
The LED is Guaranteed to work for 2 full years with free replacement.
Part # ED-3VFRED
$4.99
Click to order
This easy to use complete kit contains all you need but a boxcar and drill!
Kit Includes:
Red Flashing Nano LED set up for 3 volts
New smaller 3 volt coin cell holder with slide switch
3 volt coin cell
EZ shrink tube, shrinks with lighter/hair dryer
Instant FRED. Fun and quick one time project, for many years of enjoyment. There is no circuit board, no need for any accessory power source.
The LED is Guaranteed to work for 2 full years with free replacement.
Part # ED-NFRED
$6.29
Click to order
Welding is a common sight in Railroad repair sheds, many types of industry, automotive garages, and military installations.
Go ahead and add a lively welding scene to your Diorama!
Welding effect kit is a combination of 3 LEDs:
2 Flashing White and 1 Solid Blue.
No circuit board needed!
Part # ED-U1W Welder
$7.99
Click to order
Welding is a common sight in Railroad repair sheds, many types of industry, automotive garages, and military installations.
Go ahead and add a lively welding scene to your Diorama!
Welding effect kit is a combination of 3 LEDs:
2 Flashing White and 1 Solid Blue.
No circuit board needed!
Part # ED-UPW Welder
$10.29
Click to order
The Fire Kit is a combination of 3 LEDs: a Flashing Red, a Flashing Yellow and a Solid Orange. The secret to the fire effect is the very different flash rates of the 3 LEDs, giving a realistically random effect. You get a ready to use pack of 3 LEDs. 5-19 VAC or VDC
Part # ED-U1F Fire
$7.99
Click to order
Red Flashing Beacon
These Warning Beacon Flashing 1.8 mm LED come fully pre-assembled and look really great on Water Towers, Smoke Stacks and Bridges, Electrical Transmission Towers, and on Radio Towers. 7-19 volts
Part # ED-U1TR
$2.99
Click to order
The Fire Kit is a combination of (3) 1.8 mm LEDs: a Flashing Red, a Flashing Yellow and a Solid Orange. The secret to the fire effect is the very different flash rates of the 3 LEDs, giving a realistically random effect. You get a ready to use pack of 3 LEDs. 3 Volts DC
Part # ED-1F3V Fire
$7.19
Click to order
These Warning Beacon Flashing LEDs come fully pre-assembled and look really great on Water Towers, Smoke Stacks and Bridges, Electrical Transmission Towers, and on Radio Towers.
Part # ED-U3TR Warning Flasher
$2.99
Click to order
This Police Car Siren has 4 realistic sounds:
Wail
Priority
Phaser
4th Sound is a combination of these 3 sounds with an air horn.
Includes switch and speaker
Part # ED-PS2 Siren
$18.99
Click to order
Features: LED light source; Brass construction; Prototypical size for N scale model railroad layouts; Quick fit base removes the need for gluing, nailing and screwing – just Drill and Drop; Lights come with quick connection plug in wire harness; Connects directly to power source; Resistors included; and Light can be removed from mounting base and replaced with different style to change the look of any street or highway on your layout. 1 per package
Part # ATL-60000066
$23.99
Click to order
Features: LED light source; Brass construction; Prototypical size for N scale model railroad layouts; Quick fit base removes the need for gluing, nailing and screwing – just Drill and Drop; Lights come with quick connection plug in wire harness; Connects directly to power source; Resistors included; and Light can be removed from mounting base and replaced with different style to change the look of any street or highway on your layout. 1 per package
Part # ATL-60000070
$23.99
Click to order
Classic “whip” design for streetlights – single and dual arm versions for single lane or multiple lane roads
Parking Lot design perfect for industrial area lighting
Choice of warm or cool white LED for era-appropriate illumination
All necessary resistors included for installation
Choice of mast colors (gray or silver)
Part # ATL-70000149
$10.99
Click to order
Classic “whip” design for streetlights – single and dual arm versions for single lane or multiple lane roads
Parking Lot design perfect for industrial area lighting
Choice of warm or cool white LED for era-appropriate illumination
All necessary resistors included for installation
Choice of mast colors (gray or silver)
Part # ATL-70000153
$14.49
Click to order
All necessary resistors included for installation
Choice of mast colors ( silver)
Part # ATL-70000157
$10.99
Click to order
All necessary resistors included for installation
Choice of mast colors ( silver)
Part # ATL-70000161
$14.49
Click to order
All necessary resistors included for installation
Choice of mast colors ( Black)
Part # ATL-70000181
$10.99
Click to order
All necessary resistors included for installation
Choice of mast colors ( Black)
Part # ATL-70000182
$10.99
Click to order
All necessary resistors included for installation
Choice of mast colors ( Black)
Part # ATL-70000185
$10.99
Click to order
All necessary resistors included for installation
Choice of mast colors ( Black)
Part # ATL-70000189
$14.49
Click to order
All necessary resistors included for installation
Choice of mast colors ( Black)
Part # ATL-70000190
$14.49
Click to order
All necessary resistors included for installation
Choice of mast colors ( Black)
Part # ATL-70000193
$14.49
Click to order
All necessary resistors included for installation
Choice of mast colors ( Black)
Part # ATL-70000194
$14.49
Click to order
All necessary resistors included for installation
Choice of mast colors ( Black)
Part # ATL-70000200
$9.39
Click to order
This is by Berkshire Junction and simulates a Workshop arc welder with a bright white , random flashing LED
Part # arcwelder
$27.99
Click to order