NCE DCC Decoders

Link To NCE

 

Decoder-InstallDrop-In Decoder Install Fee
This fee is to be added if you would like any drop-in decoder installed in a compatible locomotive purchased on the same order at Fifer Hobby
Part # install
$25.00 each (loco decoder set)
Click to order

 

 

Illuminator-5 Pack
Lighting decoder compatible with Woodland Scenics Just Plug
and other lighting accessories with built in resistors
Features of this decoder::
Works with DCC or DC (limited operation on DC)
Includes mating connectors with 100mm long wires
Built-In Warm white LED (can be disabled)
Up to 3 Just Plug accessories may be controlled separately
Supplies the correct 12 Volts to Just Plug products
Can have different lighting effects each output
Each output individually dimmable
Part # NCE-165
$76.99
Click to order

 

Illuminator-single
Lighting decoder compatible with Woodland Scenics Just Plug
and other lighting accessories with built in resistors
Features of this decoder::
Works with DCC or DC (limited operation on DC)
Includes mating connectors with 100mm long wires
Built-In Warm white LED (can be disabled)
Up to 3 Just Plug accessories may be controlled separately
Supplies the correct 12 Volts to Just Plug products
Can have different lighting effects each output
Each output individually dimmable
Part # NCE-164
$13.59
Click to order

 

 

NCE119NCE Decoder N12SR
1 Amp (1.25 Amp peak) rating and two function outputs. Size: 0.34″ x 0.70″ x 0.120″.
Part # NCE-119
$28.99
Click to order

 

 

NCE-N14IPNCE Decoder N14IP
For Con Cor PA1 , 4-8-4 , and other locos with 8 pin socket
Eight pin plug in. Four function outputs. 1 Amp rating, 1.25 Amp peak. Measures 1.15″ x 0.4″ x 0.12″.
Part # NCE-N14IP
$28.79
Click to order

 

 

NCE-N14SRNCE Decoder N14SR
With a wire harness. Four function outputs. 1 Amp rating, 1.25 Amp peak. Measures 1.15″ x 0.4″ x 0.12″.
Part # NCE-N14SR
$23.99
Click to order

 

 

 

 

NCE-Z14SRPNCE Decoder Z14SRP
NCE’s smallest decoder!! 1 Amp (1.25 Amp peak) rating and four function outputs. Size: 0.34″ x 0.56″ x 0.125″. With NMRA Plug.
Part # NCE-Z14SRP
$31.99
Click to order

 

 

 

 

 

 

 

NCE-N12A2NCE Decoder N12A2
N Scale Plug and Play decoder for the new Atlas “Classic” locomotives GP30, GP35, GP7, GP9
Part # NCE-N12A2
$28.79
Click to order

 

 

NCE-N12KOANCE Decoder N12KOA
N Scale Plug and Play decoder for the new Kato , E-8, PA1,  P42.
Part # NCE-N12KOA
$31.99
Click to order

 

NCE Decoder N12KOB
N Scale Plug and Play decoder for the new Kato F3 and F7 A&B.
Part # NCE-N12KOB
$31.99
Click to order

 

NCE Decoder N14K1
N Scale Plug and Play decoder for the new Kato “Gevo” ES44AC Kato AC4400 Kato C30-7 Kato GE C44-9W
Kato SD40-2 early versions Kato ES44 Kato SD40 Kato SD40-2 SNOOT
Kato SD45 Kato SD70MAC Kato SD70 Athearn EMD F45 Athearn EMD FP45
Part # NCE-N14K1
$28.79
Click to order

 

 

NCE-NAVONCE Decoder NAVO
Plug and play N-Scale decoder Made to fit the Atlas N scale VO1000 loco with two functions
Part # NCE-NAVO
$28.79
Click to order

 

 

NCE-N12A2NCE Decoder N12A0
Plug and play N-Scale decoder (with white LEDs) for Atlas GP40-2, U25B, U23B, B23-7,30-7,36-7, GP38,SD25, TRAINMASTER, etc.
Part # NCE-0120
$31.99
Click to order

 

 

NCE-0122NCE Decoder N12A1
Plug and play N-Scale decoder (with white LEDs) for Atlas SD50 , SD60 , SD60M, etc
Part # NCE-0122
$28.79
Click to order

 

 

NCE-0127NCE Decoder N12A0E
Plug and play N-Scale decoder for Intermountain Tunnel Motor. (Same as N12A0 with extended LEDs)
Part # NCE-0127
$28.79
Click to order

 

 

NCE-0219NCE DTK Decoder Tester
Perfect DCC companion for installation and operation. Test ANY decoder before installation.
Part # NCE-0219
$23.99
Click to order

 

 

 

 

Back to DCC