RSLaser Structure Kits



RSL-302RSL N Scale Potato House Kit
Includes Lean-to extension. Several Window, door and chimney options plus 12
wood barrels and 10 pallets Laser cut shingles, peal and stick on wall and roof boards.
Laser Cut Accuracy – Precise Fit – Easy Assembly
Overall size, including steps: 2-3/8”x 4-1/2”
Part # RSL-302
Click to order



RSL-303RSL N Scale Randolph Depot Kit
The perfect station for any railroad
This kit has been designed to accurately represent the prototype structure in N scale. Builds either early or late version. More than 230 pieces of precision laser cut wood, + shingle sheets. Roof panels have scribed peal and stick installed.
Overall footprint: 3” wide x 3 3/4” deep.
Without platform: 2 5/8” x 2 5/8”
Part # RSL-303
Click to order



RSL-3003RSL N Scale Single Stall Engine House Kit
Reminiscent of the early days of railroads the RS Laserkits Single Stall Engine House and Side Shop is a blend of several of the features seen on many of the short lines, logging bases, and mines throughout the country. These structures allowed typical maintenance and storage for a wide range of locomotive and rolling stock services. These scenes are reflected in the older photographs of yesteryears railroads. These kits have full inside framing.
Footprint: 2.25″ x 4.5″
Part # RSL-3003
Click to order



RSL-3005RSL N Scale Greg’s Saloon and Repair Shop Kit
A small structure based on a design by Paul Templar. Has Saloon doors and all signs as shown, with a footprint of 3 1/2″by 5″
The saloon is named for the husband of one of my co-workers that has cancer and could not find a Saloon for his layout.
Part # RSL-3005
Click to order



RSL-3006RSL N Scale Paul’s Repair Shop Kit
Another kit based on Paul Templar’s design. This time a repair and horse shoeing shop. Kit comes with the printed signs and a glue down tar paper roof.
Footprint: 2.0 x 2.7 inches
Part # RSL-3006
Click to order



RSL-3007RSL N Scale Split Level Outhouse Kit
A real eye opening conversation piece. For that special spot on the layout.
See how many of your visitors notice this little gem.
Part # RSL-3007
Click to order




RSL-3008RSL N Scale Will’s Feed and Seed Kit
Wills Feed and Seed one of the 5 structures in our new complex of kits.
With a foot print of 5″ by 5″ this makes for a main industry.
It includes 2 different roof signs, laser cut plywood walls, laser cut widows
and trim, plus glazing, loading dock stairs and foundation.
Comes with a metal roof.
Part # RSL-3008
Click to order



RSL-3009RSL N Scale 5 Bay Open Storage Shed Kit
Second structure for the Feed and Seed complex is a 5 Bay Open Storage Shed.
With a foot print of 2″ by 6″ it has plenty of storage room.
Laser kit stud back and end wall framing with plywood sheeting for the exterior walls and enough to sheet the inside of any two interior bays.
Roll roofing is included.
Part # RSL-3009
Click to order



RSL-3010RSL N Scale Outhouses (3 pack) Kit
The kit includes 3 unique out houses with seats.
Two single stall and one two stall.
Use them behind the house or barn,
or in your yard so your train crew has a place to go read.
Part # RSL-3010
Click to order



RSL-3011RSL N Scale Dave’s House Kit
Typical 1-1/2 story frame house. These structures can be found anywhere.
Footprint 2″ x 2 1/8″.
Part # RSL-3011
Click to order




RSL-3012RSL N Scale One Car Garage Kit
Comes with doors as shown, plus a new roll-up door.
Makes it suitable for any era layout.
Footprint 1″ x 2″.
Part # RSL-3012
Click to order



RSL-3013RSL N Scale Eatery at Forks Kit
This Building is based on the original Eating house on the C&S at Forks.
Built in the 1890’s and based on drawings in Harry Brunks book Up Clear Creek.
Footprint 1.75” x 3.25”.
Part # RSL-3013
Click to order



RSL-3014RSL N Scale 24-7 Deli Kit
A Deli based on made found all on any corner in any city.
The kit includes a Pop machine and a coin operated Ice machine.
Also included is a based with sidewalls around the building.
Footprint 1.75” x 3.25”.
Part # RSL-3014
Click to order



RSL-3015RSL N Scale Log Lodge Kit
Based on many of the newer log houses and lodges being built all over the country.
Footprint 3.0” x 4.0”.
Part # RSL-3015
Click to order



RSL-3016RSL N Scale Log Cabin Kit
Based on one of many log cabins built by the early settlers all over the country.
Many are still being used today as summer or hunting camps and at resorts as overnight lodgings
Footprint 1.25” x 1.25”.
Part # RSL-3016
$11.99                     (Single)
Click  to order
Part # RSL-3016-3 (3 pack)
Click to order



RSL-3017RSL N Scale Derelict Passenger Car Kit
This car was made to replicate a abandoned passenger car that has seen much better days. These can still be found in yards or on abandoned lines.
Part # RSL-3017
Click to order



RSL-3018RSL N Scale The Saw Filers Shack Kit
This kit is based on one used by the Manary Logging Co. in the 1920’s.
It also could be used today as a flower-garden shop or Artist Studio and look great. All 20 of the front and side widows are laser cut as double hung and can be positioned in any open layout you want. The kit is supplied with skids and all the parts are laser cut from micro plywood, the only parts not supplied are the cast detail parts
Part # RSL-3018
Click to order



RSL-3019RSL N Scale Logging Bunk House Car Kit
The camp bunk house kit is base on those found here in the pacific northwest in the early 1900s through the end of railroad logging. Most of these houses were build on skids then loaded on a flat car and taken to the log camp. The kit is sizes to fit on a 36 ft. Flat car and is supplied with skids. The kit is cut from Micro plywood and the trim and widows are from sticky back veneer stock. The roof material is glue down tar paper.
Footprint: 0.6″ x 2.85″
Part # RSL-3019
Click to order



RSL-3020RSL N Scale The Skid Shack Kit
These little shacks were used by Weyerhauser at their McDonald-Vail camps. They had built over 90 of them. After the end of Railroad logging they were used as crossing shacks and storage shacks. With a foot print of 10 x 20 feet they will fit almost anywhere. Kit includes 2 shacks and 4 bunk bed kits.
Part # RSL-3020
Click to order



RSL-3021RSL N Scale The Camp Dinning Shack Kit
Based on those found in the pacific northwest from the early 1900s to the end of RR logging.
Footprint: 0.6″ x 2.85″
Part # RSL-3021
Click to order



RSL-3022RSL N Scale 1880’s Gem Hotel or Zeldas B&B Kit
This versatile structure could be either the 1880s Gem Hotel OR
Zelda’s B&B A refurbished building for tourists in your area.
Footprint: 2.50 x 3.75 inches
Part # RSL-3022
Click to order



RSL-3023RSL N Scale Dakra’s Dry Goods Kit
Another in the 1880s Main Street Series Dakra’s Dry Goods
This little shop is typical of businesses in small towns across the country.
Some are still standing today, they have been renovated for a variety of uses.
Footprint: 1.60 x 2.25 inches
Part # RSL-3023
Click to order



RSL-3024RSL N Scale Cheltenham Station Kit
This is one of many built to a standard design in Southern Ontario, Canada around the turn of the century. The last one used was in Cheltenham and was replaced in the late 1950’s So this station can be used right through the transition period.
Footprint (including platform): 3.0” x 4.75”.
Part # RSL-3024
Click to order



RSL-3025RSL N Scale Logging Cook and Kitchen Shack Kit
Based on the Cherry Valley Lumber Car in the Northwest.
Footprint: 0.6″ x 2.85″
Part # RSL-3025
Click to order



RSL-3026RSL N Scale Loading Dock Kit
Here’s a structure found on every railroad in any town. Little loading docks like these have been used since the start of railroading and are still in use today. They service the industries that do not have access to a siding so they can unload rail cars, semi trucks etc. The dock is 10 by 40 feet with a positional ramp of 10 by 19 feet.
Part # RSL-3026
Click to order



RSL-3028RSL N Scale 55 Foot Span Wood Truss Rod Bridge Kit
55 Ft Span Wood Truss Rod Bridge
4 1/8″ to 4 1/2″ between supports.
Part # RSL-3028
Click to order



RSL-3029RSL N Scale Plantation Store Kit
Based on the Oliver Plantation store built in 1908. The store was still in use in the late 1980’s. Kit includes laser cut plywood walls, laser cut windows and doors, BIS corrugated roofing. roll roofing and a sign sheet with different names for the structure.
Footprint: 3.5 by 4.25 inches.
Part # RSL-3029
Click to order



RSL-3030RSL N Scale Main Street Store Kit
Part of our 1880’s Main Street Series, here is a typical Main Street Store.
False front stores like these were a staple on main streets all over North America.
Footprint: 1.75 x 2.25 inches.
Part # RSL-3030
Click to order



RSL-3031RSL N Scale Old Town Shop Kit
Part of our 1880’s Main Street Series, here is an Old Town Shop
this could be a Blacksmith shop, Gunsmith shop, Carriage Repair shop or any other tradesman’s shop.
Footprint: 1.75 x 2.25 inches.
Part # RSL-3031
Click to order



RSL-3032RSL N Scale Cape House Kit
Contains laser cut wood walls, Laser board windows and doors plus laser cut roofing.
Footprint – 1.75 by 2.0 inches
Part # RSL-3032
Click to order




RSL-3033RSL N Scale Cape Garage Kit
Contains laser cut wood walls, Laser board windows and doors plus laser cut roofing.
Footprint- 1 7/8” by 2”.
Part # RSL-3033
Click to order



RSL-3034RSL N Scale 2 Stall Block Engine House Kit
A concrete block engine house/car repair building that could be found on any branch line or short line. Kit includes the service pits, metal roofing ,laser cut windows and trim and laser cut heavy art board walls with engraved block pattern. The roof is remove able to show off the interior truss framing and service pits.
Footprint – 3.25 x 6.5 inches .
Part # RSL-3034
Click to order



RSL-3036RSL N Scale Deadwood Gazette or LG’s Billiards Kit
A small country store that fits in any era from the 1800’s to today.
Contains laser cut wood walls, Laser board windows and doors plus laser cut roofing.
Footprint – 1 3/8 by 2 1/8 inches.
Part # RSL-3036
Click to order



RSL-3037RSL N Scale Silver Cliff Firehouse and Town Hall Kit
The Silver Cliff Colorado firehouse and town hall was built in 1879 and still stands today. It is one of the few original building still left in the small town and today is used as a Museum.
Footprint – 1 13/16″ by 3 1/8th”
Part # RSL-3037
Click to order




RSL-3038RSL N Scale Tom’s Country Store Kit
Based on a store in Jefferson Oregon
Footprint – 1 1/4” x 2”
Part # RSL-3038
Click to order



RSL-3039RSL N Scale Linden Freight House Kit
The freight house at the crossing of the Monon and Nickel Plate Railroads at Linden Indiana.
Footprint – 3 3/8” x 4 1/4“
Part # RSL-3039
Click to order



RSL-3040RSL N Scale BillCo. Freight Kit
Walls are laser cut bass wood with Tichy windows and doors, laser cur basswood dock framing with a ply deck with engraved nail holes. Set of laser cut stairs and assembly jig.
Footprint of dock is 1 1/4 x 2 ½ inches
Building floor print is 1 1/4 x 1 1/4 inches
Part # RSL-3040
Click to order



RSL-3041RSL N Scale Keystone Mill Kit
The original Keystone Mill was built in the late 1900s and still stands today as a lumber yard in Pennsylvania. Each kit features a foundation cast by Motrak, board-on-board laser-cut siding, and Northeastern lap siding. This kit is limited to a run of 200 so reserve yours today.
Footprint – 2.5 inches by 6.5 inches.
Part # RSL-3041
Click to order



RSL-3042RSL N Scale Vicky’s Veggies Kit
A road side stand that can be used any were in any era. You will find many uses for this little building. Includes interior display cabinets plus a downloadable interior framing sheet by Clever models.
Footprint – 2 1/8” x 2 1/4” for the base.
Part # RSL-3042
Click to order



RSL-3044RSL N Scale Roundtree Farms Barn Kit
A small Gabled roofed barn as found on many Farms around the country. This design is ageless and has been used since the mid 1800’s
Footprint – 2 9/16” x 4 1/2” for the base.
Part # RSL-3044
Click to order




RSL-3045RSL N Scale Munson Building Kit
Contains laser cut laser board walls, Laser board windows and doors. plus Fire escapes.
Footprint: 2.25” x 3.0”
Part # RSL-3045
Click to order






RSL-3046RSL N Scale Jeff’s Roach Shack Kit
Jeff’s is a small road side stand that is modeled after one near Salem, or will fit in most any era and has many uses. Kit includes Tichy and Grandt Line parts plus two picnic table kits and a sign sheet with 5 different names.
Footprint: 1-1/4 “ by 1-3/8”
Part # RSL-3046
Click to order



RSL-3047RSL N Scale Bob’s Barrel Factory Kit
A prefect small building with many uses. Use as a Freight house, warehouse or small factory. Includes Lean-to extension, several window, door and chimney options plus 12 wood barrels and 10 pallets, metal roofing, Northeastern lap siding and doors.
Footprint: 3-3/8 “ by 4-1/2”
Part # RSL-3047
Click to order



RSL-3048RSL N Scale Carl’s Cabin Kit
Carl’s cabin is like many that were found in logging and mining camps. Today you will find them used as hunting camps, vacation getaways and can even be used as a wrong side of the tracks house.
Footprint: 1 1/4” by 2 1/4”
Part # RSL-3048
Click to order




RSL-3049RSL N Scale Speeder Shed Kit
This shed is based on a speeder shed on the late John Allen’s G&D layout. Kit includes, fuel oil tank code 40 weathered rail for the speeder track strip wood for the rail in fill decks.
Speeder also included with kit.
Footprint: 1” by 2 1/2”
Part # RSL-3049
Click to order



RSL-3050RSL N Scale Northern Enclosed Water Tower Kit
Wood and Metal Parts
Footprint: unknown
Part # RSL-3050
Click to order





RSL-3051RSL N Scale Consolidated Timber Camp Shacks Kit
The kit builds 5 camp shacks based on the ones used by Consolidated Timber in North western Oregon in the 30’s. Kit contains parts to build 5 camp shacks. Included are 10 side walls , 12 end walls, Metal corrugated roofing and strip wood for the skids.
DOES NOT include trucks or disconnects.
Part # RSL-3051
Click to order



RSL-3054RSL N Scale Redneck Garage Kit
A run down, falling down Garage with outside bracing holding it up. Kit includes interior stud framing, Exterior siding and engraved nail holes, siding cut out to expose the framing, laser cut windows and trim plus the window glass is laser cut from broken windows. A great first wood laser kit because even if you don’t get all the joints perfect it just adds to the run down look. Vines not included but directions give a easy way to make them.
Footprint: 1-3/4” “ by 1-3/4”.
Part # RSL-3054
Click to order



RSL-3055RSL N Scale Brick Farm House Kit
A brick farm house patterned after ones back in my old home town area in upstate NY. Includes Pre-colored slate roofing, Tichy windows and doors and Grandt-Line chimneys.
Footprint: 2-1/2” by 3”.
Part # RSL-3055
Click to order




RSL-3056RSL N Scale Round Tree House Kit
A wood framed farm house patterned after ones back in my old home town area in upstate NY. Includes Pre-colored slate roofing, Tichy windows and doors and Grandt-Line chimneys.
Footprint: 2-1/2” by 3”.
Part # RSL-3056
Click to order



RSL-3057RSL N Scale Courter Factory Kit
Built with the loading dock on either side and the side addition can be moved or built as a stand alone structure
Footprint: main building 4″ by 7″ with out addition, 7″ by 8″ with addition. The Addition as a stand alone is 1.5″ by 3″.
Part # RSL-3057
Click to order



RSL-3062RSL N Scale S J Asher Supply Kit
Asher Supply is a small Stone building that has many uses. Could be a track side freight house or warehouse. Or a in town contractors supply house.
Foot print – 2 3/8” by 6 1/2”.
Part # RSL-3062
Click to order



RSL-3063RSL N Scale Harris Door Manufacturing Background Kit
Harris door is a background kit and is modeled after some track side industries found in most towns that had manufacturing.
Foot print – 8 3/8” by 1 1/2”.
Part # RSL-3063
Click to order



RSL N Scale Medford General Store Kit
This kit is typical of many of the small town General Stores found all over the country.
With store in front and warehouse/mill in the back.
Kit contains laser cut wood walls, Tichy windows and our paper corrugated roofing.
Foot print: 2 1/2” x 4 1/2”
Part # RSL-3066
Click to order




RSL N Scale First Bank Building Kit
A prefect small brick building for that downtown main street.
Includes interior parts including a partition wall with teller windows,
two tables for the lobby and interior lighting by a supplied LED light.
Foot print (with sidewalk:) 1 9/16″ x 2 1/4″
Part # RSL-3067
Click to order




RSL N Scale Pool Hall Kit
A prefect small building for that down town street or back road.
Includes a full interior complete with 2 pool tables Bar and back bar,
Stools and cue rack plus wall paper.
Also a LED light.
Foot print (with sidewalk) 1 3/4″ x 2 3/4″
Part # RSL-3068
Click to order


RSL N Scale Storage and Hand Car Shed Kit
This Track side shed is based on one found on the Illinois Central in the Levee yard in new Orleans but is similar to sheds found on all railroads from the late 1800’s on and can still be found today.
This kit can be built either as a wood sided structure or as a later version that was reside in corrugated metal later in it’s life.
Includes Tichy windows and laser cut doors.
Footprint: 1.375″ x 2.375″
Part # RSL-3071
Click to order




RSL N Scale Small Ice House Kit
Reminiscent of the ice house found in every town and hamlet before refrigeration became the norm.
These would be used to store Ice for summer use and would be track side if there was a railroad or could even be near the lake or river where they cut the winter ice.
This one is pattern after one that was on the DL&W in Northumberland ,PA.
Footprint: 1.375″ x 2.375″
Part # RSL-3072
Click to order



RSL N Scale Gus’s Shoes Kit
A small shop that come with three Sign brackets.
A Boot, a plain Oval and the Fish.
Laser etched roofing and siding, peal and stick doors and windows.
Footprint 7/8” x 1 3/4”
Part # RSL-3073
Click to order



RSL N Scale General Store Kit
Laser-cut wood Kit with Tichy Train Group detail parts and signs.
Based on prototype in Belville, N.C.
Footprint is 2-1/2″ x 2-5/8″.
Part # RSL-3074
Click to order






RSL N Scale Green Island Water Tank Kit
Laser-cut wood Kit with Tichy Train Group detail parts.
Based on Delaware & Hudson prototype in Green Island, N.Y.
Footprint is 1 1/2″ x 1 1/2″
Part # RSL-3075
Click to order






RSL N Scale Steve’s Speed Shop Kit
Included interior details as shown plus 2 cars.
Show room interior has parts counter and 4 parts racks 2 LED lights , Street sign and base, 2 fuel pumps and a sign sheet with 2 different names Steve’s and Acme Auto Repair.
Foot print without fuel island 4 1/4 “ by 2 1/2”
Part # RSL-3076
Click to order



RSL N Scale Schoharie Junction Station Kit
This station was at junction of the D&H and Middleburgh and Schoharie RR’s near what is now Central Bridge NY.
The station was built sometime as round 1880 and used till the Railroad folded in the late 1930’s.
Footprint: Building 2.25″ x 5.125″, Platform 3.75″ x 7″
Part # RSL-3078
Click to order



RSL N Scale Mudville Station Kit
A small Victorian station that would look great on any layout.
Mudville the famous home of the Mudville 9 and Casey at the Bat.
This kit is based on a design by Dave Rouse and we have to give him a big thanks for letting us offer it to you in N scale.
Footprint: 2 1/8 x 4 inches for the platform.
Part # RSL-3079
Click to order




RSL-31000RSL N Scale 30ft 22.5 Degree Girder Bridge Kit
Wood Kit, available in 30′, 40′ OR 60′ span.
and with a crossing degree of 22.5, 45.5 and Straight.
Part # RSL-31032
Click to order



RSL-31000RSL N Scale 30ft 45 Degree Girder Bridge Kit
Wood Kit, available in 30′, 40′ OR 60′ span.
and with a crossing degree of 22.5, 45.5 and Straight.
Part # RSL-31034
Click to order



RSL-31000RSL N Scale 40ft 22.5 Degree Girder Bridge Kit
Wood Kit, available in 30′, 40′ OR 60′ span.
and with a crossing degree of 22.5, 45.5 and Straight.
Part # RSL-31042
Click to order



RSL-31000RSL N Scale 40ft 45 Degree Girder Bridge Kit
Wood Kit, available in 30′, 40′ OR 60′ span.
and with a crossing degree of 22.5, 45.5 and Straight.
Part # RSL-31044
Click to order



RSL-3920RSL N Scale Shake Shingles
Sheets 4.25 by 6 inches, will cover a roof area 24 square inches or 4200 square scale feet.
Part # RSL-3920
Click to order







Back to Structures