Miller Engineering N Scale Single window Fire Escape
Make any model building safer when you add this detailed accessory. A great addition to downtown buildings of every kind, the kit can be adapted to most structures. Includes drill template for correct placement over windows and enough photo-etched parts to add a fire escape to a building up to three stories tall.
Part # MIL-601011
$7.19
Click to order
Ngineering Fancy Clock Faces, Weather Vanes and Signs
This brass fret is in two duplicated sections, with each containing 4 each of 3 different sized clock faces complete with separate hands. Each face is relief-etched to create raised numerals and face edge. Also included is a very ornate mounting for the largest clock face complete with fancy spacers and spires. This is typical of the type of clock seen suspended off the front of older brick bank and office buildings (1920s era) in downtown districts. An instruction sheet covering clock assembly is included.
Also on this fret are numerous weather vanes complete with distinctive decoration (cat, rooster, sunburst, etc.), various ornate sign boards for storefronts, cafes or pubs, and… several wrought-iron style plant or sign hangers. There is an amazing amount of incredibly detailed N-Scale hardware on this fret. Our pictures don’t do it justice, and… there’s 2 sets of everything!
Part # N-NM001
$11.29
Click to order
Ngineering Ornate Cast-iron Tables, Chairs and Benches
This superbly detailed fret also contains two duplicate sections of fancy cast-iron style furniture. The tables and chairs are often seen in outdoor restaurant and cafe areas or as up-scale patio or deck furniture. The 2 styles of benches are common to many areas including sidewalk settings, businesses, parks and customer waiting areas.
Part # N-NM002
$11.29
Click to order
Ngineering Ladders, Step Ladders and Scaffolds
This is a very complete assortment of ladders. There are 10, 50-foot lengths of industrial ladder in 2 groups of 2 different widths, various foldable step ladders, leaning ladders and 3 scaffold assemblies complete with side-rails. The scaffolds are of the type you would see being used by window washers or painters on buildings. The ladder rungs are etched to an extremely fine width giving them a very prototypical N-Scale appearance. Extension ladders can also be easily produced by following the included instructions.
Part # N-NM012
$11.29
Click to order
Ngineering Industrial Windows & Vents w/Brick Molding
This over-sized fret contains a large assortment of highly detailed Georgian-style windows and vents commonly used in brick train stations, warehouses, factories, and roundhouses built in the early 1900’s. Also included are arched brick cornices with key-stones for placement above the arched window and vent openings. These are especially attractive when used in conjunction with a section of brick wall with an opening cut to accept the window or vent, such as DPM’s Modular Wall System.
Part # N-NS014
$15.79
Click to order
N Scale Tichy Trains Window Double 6/6
60″W x 96″H 6/6 DOUBLE HUNG MASONRY WINDOW.
GRAY INJECTION MOLDED STYRENE.
INCLUDES PRECUT GLAZING.
OPENING .37″ x .60″
12 PCS
Part # TICH-2501
$3.29
Click to order
N Scale Tichy Trains Door 4 lite 3 panel
36″W x 80″H 4 LITE 3 PANEL MASONRY DOOR.
INJECTION MOLDED IN GRAY STYRENE.
INCLUDES PRECUT GLAZING.
OPENING .26″ x .53″
8 PCS
Part # TICH-2505
$3.49
Click to order
N Scale Tichy Trains windows
12 pane arched top windows.
55″ x 107″ ROUND TOP WINDOW
INJECTION MOLDED IN GRAY STYRENE.
INCLUDES PRECUT GLAZING.
12 PCS
OPENING .38″ x .67″
Part # TICH-2506
$3.49
Click to order
N Scale Tichy Trains Window 6/6 double hung
34″ x 60″ 6/6 DOUBLE HUNG WINDOW.
INJECTION MOLDED IN GRAY STYRENE.
INCLUDES PRECUT GLAZING. 12 PCS
OPENING .26″ x .425″
Part # TICH-2508
$2.79
Click to order
N Scale Tichy Trains Window 2/2 double hung
30″W x 62″H 2/2 DOUBLE HUNG WINDOW.
GRAY INJECTION MOLDED STYRENE.
INCLUDES PRECUT GLAZING.
OPENING .21″ x .415″ 12 PCS
Part # TICH-2509
$3.49
Click to order
N Scale Tichy Trains Window 6 Lite
40″ x 27″ 6 LITE WINDOW.
INJECTION MOLDED IN GRAY STYRENE.
INCLUDES PRECUT GLAZING. 12 PCS
OPENING .275″ x .185″
Part # TICH-2510
$3.29
Click to order
N Scale Tichy Trains Window 8 light
30″ x 80″ 4/4 DOUBLE HUNG WINDOW. INJECTION MOLDED IN GRAY STYRENE.
INCLUDES PRECUT GLAZING.
12 PCS
OPENING .21w” x .52h”
Part # TICH-2512
$3.29
Click to order
N Scale Tichy Trains Window and Door Assortment
THIS ASSORTMENT CONTAINS ONE SPRUE OF EVERY DOOR AND WINDOW WE MAKE IN N SCALE FROM 2501 TO 2521. OVER 80 PIECES PLUS CATALOG PAGE.
Part # TICH-2522
$14.49
Click to order
N Scale Tichy Trains windows
40 pane engine house windows.
60” W X 126” H
Part # TICH-2523
$3.49
Click to order
N Scale Tichy Trains Steel Doors
30″W x 80″H STEEL DOOR.
INJECTION MOLDED IN GRAY STYRENE
OPENING .22″ x .49″
8 PCS.
Part # TICH-2537
$3.39
Click to order
N Scale Tichy Trains Louvered Wall Vents
14 vents.
24” W X 24” H
Part # TICH-2539
$2.79
Click to order
N Scale Tichy Trains .020 Rivet Heads
200 rivets.
.020
Part # TICH-8017
$2.99
Click to order
N Scale Tichy Trains Brick Chimney’s
3 chimney’s.
Plastic
Part # TICH-2527
$3.49
Click to order
N Scale Bar Mills Sidewalk Freight Elevator Kit
These are based on a prototype; ours are made of brass & require little effort to build.
Part # BAR-301
$8.99
Click to order
N Scale Bar Mills Sidewalk Kit
Wood Kit Includes corners and 400 scale feet of realistic sidewalk.
Part # BAR-681
$12.59
Click to order
N Scale Bar Mills Fuel Tank Kit
Horizontal Fuel Tanks – Kit (Resin, Metal, Wood).
Part # BAR-2002
$10.99
Click to order
N Scale REM Soda Machine Set
Soda Machine Set (Unpainted)
Part # REM-2191
$7.99
Click to order
N Scale REM Deluxe Gas Station Detail Set
Deluxe Gas Station Detail Set (Unpainted)
Part # REM-2181
$10.19
Click to order
N Scale Model Tech Gas Pumps
This is cast resin (1) piece. (painted)
Part # D1259P
$8.59
Click to order
N Scale Model Tech Sloped Stair Roof Exit 2 pack
This is cast resin (2) piece. (painted)
Part # D1012P
$7.99
Click to order
N Scale Model Tech Mechanical Ducting
These are cast metal duct assortments to form many configurations (unpainted).
Part # D1054
$7.19
Click to order
N Scale Model Tech 8 Piece Roof Vent Kit
These are cast metal roof vents (unpainted).
Part # D1034
$4.29
Click to order
N Scale Model Tech Sky Lights
These are cast resin (unpainted) 3 pieces.
Part # D1044
$5.69
Click to order
N Scale Model Tech Modular Piping
These are cast resin white (UN-PAINTED).
Part # D1063
$9.79
Click to order
N Scale Model Tech 40’s and 50’s juke boxes (2 pack)
These are cast resin (UN-PAINTED).
Part # D1130
$5.59
Click to order
N Scale Model Tech Factory Sawdust Collector
These are cast resin and Laser cut wood (UN-PAINTED) and needs assembly.
Part # D1171
$9.39
Click to order
N Scale Gold Medal Models Standard Fire Escape
(3 stories)
These are Etched Brass.
Part # GMM-1603
$11.99
Click to order
N Scale Gold Medal Models Fancy Fire Escape
(3 stories)
These are Etched Brass.
Part # GMM-1605
$11.29
Click to order
N Scale Gold Medal Models Venetian Blinds
These are Etched Brass.
Part # GMM-16019
$8.49
Click to order
N Scale Gold Medal Models Burglar Bars
These are Etched Brass.
Part # GMM-16020
$8.59
Click to order
N Scale Gold Medal Models Rooftop TV Antennas
(package of 20)
These are Etched Stainless.
Part # GMM-16021
$8.59
Click to order
N Scale Gold Medal Models Industrial Railings
These are etched metal.
Part # GMM-16034
$16.99
Click to order
N Scale Gold Medal Models Industrial Stairways
These are etched Brass.
Part # GMM-16035
$16.99
Click to order
N Scale Gold Medal Models Industrial Walkways
These are etched Brass.
Part # GMM-16059
$19.59
Click to order
N Scale GCLaser Tables and Chairs
(19 tables and chairs)
These are Laser cut Wood kits.
Part # GCL-1103
$11.99
Click to order
BLMA N Scale Trackside Signal/Grade Crossing Electrical Box
(2each)
Part # BLMA-89
$4.60
Click to order
BLMA N Scale Outhouses
(2each)(laser cut wood)
Part # BLMA-601
$4.40
Click to order
Micro-Engineering N Scale Overhead Doors
(4 each)
Part # ME80-200
$3.59
Click to order
Micro-Engineering N Scale Office Windows and Doors
(10)
Part # ME80-201
$3.59
Click to order
Micro-Engineering N Scale Roof Vents and Fans
(6)
Part # ME80-202
$3.19
Click to order
Micro-Engineering N Scale Steps and Stoops
(4)
Part # ME80-203
$3.59
Click to order
Micro-Engineering N Scale Warehouse Rollup Doors
(4)
Part # ME80-204
$4.29
Click to order
Blair Line Central A/C unit Kit
Kit includes 4 ea. Laser cut adhesive backed lazerboard and basswood air conditioner units. Easy to assemble tab and slot construction and most of the parts are peel-n-stick. Parts are laid out on carrier sheet by paint color for easy painting.
Part # BL-1705
$7.99
Click to order
Blair Line Fans and Vents Kit
Install fans on walls or windows. Install Vents on walls. Easily adds interest and detail to plain walls. Fans (7 ea.) in two different sizes and vents (15 ea.) in two different sizes.
Very easy to assemble peel-n-stick parts. Laser cut adhesive backed lazerboard. Parts are laid out on carrier sheet by paint color for easy painting.
Part # BL-1707
$8.59
Click to order
Blair Line Burglar Bars Kit
30 ea. N scale, burglar (security) bars in four different sizes for doors and/or windows. Laser cut from thin lazerboard. Lazerboard is a resin impregnated Kraft liner board and may be glued and painted same as wood. Easy to trim to size. Paint and install on your buildings for a great and often missing urban detail.
Part # BL-1708
$7.99
Click to order
RSLaser N Scale Stair kit
Stair kits have 12 stringers 80 4 foot treads and assembly jig.
Laser cut wood
Part # RSL-3503
$7.49
Click to order
RSLaser N Scale Pool Tables
6 Table Kit.
Laser cut wood
Part # RSL-3529
$6.89
Click to order
